S2K Commerce - Products Dropdown
Actions
S2K Commerce - Order Entry
Actions
- Slide tube steel frame in black powder coat finish
- Single axle positioning
- Easy-to-clean, comfortable vinyl upholstery
- Flip-back, padded, upholstered armrests are removable
- Chart pocket on back for additional convenience
- Includes tool-free swing-away footrests with heel loops or elevating padded legrests with composite footplates
- Elevating legrests are equipped with a pneumatic piston for infinite elevating positions
- Easy push-to-lock wheel locks
- Composite handrims with 24" solid urethane tires
- 8" x 1" solid rubber front casters
- Precision sealed wheel bearings in front and rear ensure long lasting performance and reliability
- HCPCS* Code: K0001 | K0195 OR E0990 (elevating legrests only)
WARNING: This product can expose you to chemicals including Antimony Oxide, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov
The ProBasics Lightweight Semi-Electric Bed is easy for one person to transport--with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on or off low-voltage DC motor box ensure quick and efficient set-ups and easy routine maitenance.
Your clients will take comfort that in the event of a power failure a 9V battery back-up may be used to allow movement to the lowest bed position. Plus, the smart, recessed design of the head and foot spring assemblies help reduce pinching and injuries.
The split-spring design incorporated into the low bed profile still allows for the easy, one-person delivery but with all the benefits of a low bed.
-
FEATURES
- Easy to transport - foot section weighs just 42 lb.
- Quick set-up and easy maintenance with motor and electronics that can be removed for service or cleaning
- Head and foot sections can be raised independently or simultaneously
- Large button, simple-to-use hand pendant
- Manual crank at the foot adjusts the frame height
- Scratch-resistant bed ends keep the bed looking new
- 9V battery back-up lets users go to the lowest bed position during power failures (batteries not included)
- Headspring support and foot assembly are recessed to help reduce pinching and injuries
- Trendelenberg and reverse Trendelenberg position capable
- Beds include two locking and two non-locking casters
- Quiet, efficient ETL-approved DC low voltage single motor box
- HCPCS Code: E0295*
PRODUCT SPECIFICATIONS
| Bed Height: | 15" min. to 20" max. (without mattress) |
| Sleep Surface: | 80"L x 36" W |
| Overall Bed: | 87"L x 36" W |
| Weight Capacity: | 450 lb |
| Limited Warranty: | 5 Years on Frame 2 Years on Motor - mechanical/electrical |
SHIPPING SPECIFICATIONS
| Component: | Carton Size: | Shipping Weight: |
| Foot/Head Springs Motor Box, and pendant |
45.5"x 10.5"x 37" | 104 lb. |
| Head/Foot Bed Ends and Casters |
38"x 7.5"x 32.25" | 56 lb. |
BED PACKAGE COMPONENTS - OPTIONS
| Bed Rails | |
|---|---|
| PB6034 | Full Bed Rails |
| PB7035 | Half Bed Rails |
| Mattress | |
| PBSATINFOAM3680 | Compressed Foam Mattress |
| PBHBMATIS | 80 Inner-Spring Mattress |
| PBHBMATFB | Fiber Core Mattress |
| ARUBA-200 | ARUBA-200 Cross-cut Mattress |
The ProBasics Group 1 Foam Mattress provides patients with the additional support and comfort they need to prevent pressure sores. Made with premium quality foam, it is designed to offer both effective pressure relief and a comfortable night's sleep.
- Premium quality foam reduces pressure on the bones to prevent bed sores and skin ulcers
- Cover is waterproof and removable
- Non-slip underside keeps overlay firmly in place atop mattress
- Mattress is fire retardant and meets 16 CFR 1633 requirements
- Ships compact and arrives in super compressed packaging; box footprint is only 14" x 14" x 37"
- Weight capacity: 300 lbs
- Product dimensions: 80" x 36" x 6"
- Limited 12-month warranty
To give patients the necessary additional comfort and support to
prevent pressure sores, purchase the ProBasics Group 1 Foam Mattress.
The ProBasics K1 Manual Wheelchair combines style and durability at an affordable price. Standard features include flip back removable padded armrests, easy-to-clean vinyl upholstery, chart pocket and heel loops on the front riggings. Supporting patient weights up to 250 pounds, the ProBasics K1 Standard Wheelchair is a popular choice among providers.
- Slide tube steel frame in black powder coat finish
- Single axle positioning
- Easy-to-clean, comfortable vinyl upholstery
- Flip-back, padded, upholstered armrests are removable
- Chart pocket on back for additional convenience
- Includes tool-free swing-away footrests with heel loops
- Easy push-to-lock wheel locks
- Composite handrims with 24" solid urethane tires
- 8" x 1" solid rubber front casters
- Precision sealed wheel bearings in front and rear ensure long lasting performance and reliability
- HCPCS* Code: K0001
K0195 OR E0990 (elevating legrests only)
WARNING: This product can expose you to chemicals including Antimony Oxide, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov
- Slide tube steel frame with an attractive silver vein finish that is chip resistant and easy to maintain. Rear anti-tippers and Easy push-to-lock wheel locks come standard.
- Padded Desk-length, detachable armrests provide added patient comfort.
- Easy-to-clean, comfortable vinyl upholstery that accommodates a wide range of users. Chart pocket on backrest provides additional convenience. Headrest extension comes standard with head immobilizer.
- Tool-free elevating padded legrests are equipped with a pneumatic piston for infinite positions and composite footplates.
- Composite handrims with mag-style wheels are lightweight and maintenance free. 8" x 1" solid rubber front casters. Wheels are set back on frame to prevent tipping.
WARNING: This product can expose you to chemicals including Antimony Oxide which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
- Heavy Duty, slide tube silver vein steel frame
- 8" x 2" semi-pneumatic casters are adjustable in 3 positions
- 24" rear urethane wheels with durable hand rims
- Removable desk length arms with padded armrests
- Heavy duty vinyl padded upholstery
- Easy push-to-lock wheel locks
- HCPCS* Code: K0007, K00195 or E0990 (elevating legrests only)
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov .
- Slide tube steel frame in black powder coat finish
- Single axle positioning
- Easy-to-clean, comfortable vinyl upholstery
- Flip-back, padded, upholstered armrests are removable
- Chart pocket on back for additional convenience
- Includes tool-free swing-away footrests with heel loops or elevating padded legrests with composite footplates
- Elevating legrests are equipped with a pneumatic piston for infinite elevating positions
- Easy push-to-lock wheel locks
- Composite handrims with 24" solid urethane tires
- 8" x 1" solid rubber front casters
- Precision sealed wheel bearings in front and rear ensure long lasting performance and reliability
- HCPCS* Code: K0001 | K0195 OR E0990 (elevating legrests only)
WARNING: This product can expose you to chemicals including Antimony Oxide, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov
The ProBasics Lightweight Semi-Electric Bed is easy for one person to transport--with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on or off low-voltage DC motor box ensure quick and efficient set-ups and easy routine maitenance.
Your clients will take comfort that in the event of a power failure a 9V battery back-up may be used to allow movement to the lowest bed position. Plus, the smart, recessed design of the head and foot spring assemblies help reduce pinching and injuries.
The split-spring design incorporated into the low bed profile still allows for the easy, one-person delivery but with all the benefits of a low bed.
-
FEATURES
- Easy to transport - foot section weighs just 42 lb.
- Quick set-up and easy maintenance with motor and electronics that can be removed for service or cleaning
- Head and foot sections can be raised independently or simultaneously
- Large button, simple-to-use hand pendant
- Manual crank at the foot adjusts the frame height
- Scratch-resistant bed ends keep the bed looking new
- 9V battery back-up lets users go to the lowest bed position during power failures (batteries not included)
- Headspring support and foot assembly are recessed to help reduce pinching and injuries
- Trendelenberg and reverse Trendelenberg position capable
- Beds include two locking and two non-locking casters
- Quiet, efficient ETL-approved DC low voltage single motor box
- HCPCS Code: E0295*
PRODUCT SPECIFICATIONS
| Bed Height: | 15" min. to 20" max. (without mattress) |
| Sleep Surface: | 80"L x 36" W |
| Overall Bed: | 87"L x 36" W |
| Weight Capacity: | 450 lb |
| Limited Warranty: | 5 Years on Frame 2 Years on Motor - mechanical/electrical |
SHIPPING SPECIFICATIONS
| Component: | Carton Size: | Shipping Weight: |
| Foot/Head Springs Motor Box, and pendant |
45.5"x 10.5"x 37" | 104 lb. |
| Head/Foot Bed Ends and Casters |
38"x 7.5"x 32.25" | 56 lb. |
BED PACKAGE COMPONENTS
| Bed Rails | |
|---|---|
| PB6034 | Full Bed Rails |
| Mattress | |
| PBSATINFOAM3680 | Compressed Foam Mattress |
The ProBasics K3 Lightweight Wheelchair offers all the benefits of a standard K3 wheelchair with the added feature of removable flip back height adjustable arms and 2-inch upholstery seat extension. Weighing less than 36 pounds, the ProBasics K3 also comes standard with tool-free adjustable front riggings and easy push-lock wheel locks.
- Cross-brace, powder-coated silver vein steel frame
- Removable flip back height adjustable arms allow for easy transfer
- 2-inch removable seat extension
- Dual axle provides easy transition of seat height to hemi-level
- Easy-to-clean, comfortable nylon upholstery
- Includes tool-free elevating legrests with composite footplates
- Elevating legrests are equipped with a pneumatic piston for infinite elevating positions
- Easy push-to-lock wheel locks
- Precision sealed wheel bearings in front and rear ensure long lasting performance and reliability
- Composite handrims with 24" solid urethane tires
- 8" x 1" solid rubber front casters
- HCPCS* Code: K0003
K0195 OR E0990 (elevating legrests only)
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov .
The ProBasics IV Pole is perfect for hospital or at-home
IV therapy, with twin wheel swivel casters that are easy to glide across hard
floor or carpet. It is also accessible for everyone, with a wide height
adjustment range.
- Chrome-plated and made of durable hammertone steel
- Offset low profile base keeps IV pole stable
- Twin wheel swivel casters allow for IV pole to move smoothly across hard floor or carpet
- Twist lock provides full range of height positions
- Two-pronged removable top keeps IV containers securely in place while making IV pole easy to store and transport
- Height adjustment: 45.5" to 79"
- Base size: 23"
- Quantity: 2/case
The ProBasics Lightweight Semi-Electric Bed is easy for one person to transport--with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on or off low-voltage DC motor box ensure quick and efficient set-ups and easy routine maitenance.
Your clients will take comfort that in the event of a power failure a 9V battery back-up may be used to allow movement to the lowest bed position. Plus, the smart, recessed design of the head and foot spring assemblies help reduce pinching and injuries.
The split-spring design incorporated into the low bed profile still allows for the easy, one-person delivery but with all the benefits of a low bed.
-
FEATURES
- Easy to transport - foot section weighs just 42 lb.
- Quick set-up and easy maintenance with motor and electronics that can be removed for service or cleaning
- Head and foot sections can be raised independently or simultaneously
- Large button, simple-to-use hand pendant
- Manual crank at the foot adjusts the frame height
- Scratch-resistant bed ends keep the bed looking new
- 9V battery back-up lets users go to the lowest bed position during power failures (batteries not included)
- Headspring support and foot assembly are recessed to help reduce pinching and injuries
- Trendelenberg and reverse Trendelenberg position capable
- Beds include two locking and two non-locking casters
- Quiet, efficient ETL-approved DC low voltage single motor box
- HCPCS Code: E0295*
PRODUCT SPECIFICATIONS
| Bed Height: | 15" min. to 20" max. (without mattress) |
| Sleep Surface: | 80"L x 36" W |
| Overall Bed: | 87"L x 36" W |
| Weight Capacity: | 450 lb |
| Limited Warranty: | 5 Years on Frame 2 Years on Motor - mechanical/electrical |
SHIPPING SPECIFICATIONS
| Component: | Carton Size: | Shipping Weight: |
| Foot/Head Springs Motor Box, and pendant |
45.5"x 10.5"x 37" | 104 lb. |
| Head/Foot Bed Ends and Casters |
38"x 7.5"x 32.25" | 56 lb. |
BED PACKAGE COMPONENTS
| Bed Rails | |
|---|---|
| PB7035 | Half Bed Rails |
| Mattress | |
| PBHBMATIS | 80 Inner-Spring Mattress |
The ProBasics Lightweight Semi-Electric Bed is easy for one person to transport--with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on or off low-voltage DC motor box ensure quick and efficient set-ups and easy routine maitenance.
Your clients will take comfort that in the event of a power failure a 9V battery back-up may be used to allow movement to the lowest bed position. Plus, the smart, recessed design of the head and foot spring assemblies help reduce pinching and injuries.
The split-spring design incorporated into the low bed profile still allows for the easy, one-person delivery but with all the benefits of a low bed.
-
FEATURES
- Easy to transport - foot section weighs just 42 lb.
- Quick set-up and easy maintenance with motor and electronics that can be removed for service or cleaning
- Head and foot sections can be raised independently or simultaneously
- Large button, simple-to-use hand pendant
- Manual crank at the foot adjusts the frame height
- Scratch-resistant bed ends keep the bed looking new
- 9V battery back-up lets users go to the lowest bed position during power failures (batteries not included)
- Headspring support and foot assembly are recessed to help reduce pinching and injuries
- Trendelenberg and reverse Trendelenberg position capable
- Beds include two locking and two non-locking casters
- Quiet, efficient ETL-approved DC low voltage single motor box
- HCPCS Code: E0295*
PRODUCT SPECIFICATIONS
| Bed Height: | 15" min. to 20" max. (without mattress) |
| Sleep Surface: | 80"L x 36" W |
| Overall Bed: | 87"L x 36" W |
| Weight Capacity: | 450 lb |
| Limited Warranty: | 5 Years on Frame 2 Years on Motor - mechanical/electrical |
SHIPPING SPECIFICATIONS
| Component: | Carton Size: | Shipping Weight: |
| Foot/Head Springs Motor Box, and pendant |
45.5"x 10.5"x 37" | 104 lb. |
| Head/Foot Bed Ends and Casters |
38"x 7.5"x 32.25" | 56 lb. |
BED PACKAGE COMPONENTS
| Bed Rails | |
|---|---|
| PB7035 | Half Bed Rails |
| Mattress | |
| PBSATINFOAM3680 | Compressed Foam Mattress |